Guiding mount time: 10-12 hour(s).
| Click on the images below to see videos from ESS Tuning |
 |  |  |  |
Technically specifications from the manufacturer:
Boost pressure: 8 PSI
Horsepower: 350 DIN/340 Auto (Stock 225SAE/231DIN)
Torque: 430 NM /410 NM Auto (Stock 300)
Correction factor for drivetrain loss is 15% above RWHP as seen in dynograph (RWHP/0.85)
0 - 60: Man : 4.8 sec, Aut : 5.6 sec
Installation time : 8-10 hours
Some the best and most effective BMW supercharger systems on the market are made by the norwegian company ESS (European Supercharger Systems).
ESS main goals:
-Durability (That is also why ESS offers 2 years warranty on the kits)!
-Everyday use capability!
-Easy and relativily fast installing!
-Reasonable prices!
-To deliver 100% complete and tested systems!
-That the kits can be installed on stock unmodified engines (thanks to a low boost level)!
Please note:
-Even though the kits dosn´t exceed the emission levels, the kits can´t pass the MOT in most countries because they are not TÜV approved!
-The engine control box must be send to Norway to get new software installed, that is adjusted for the supercharger system, this is included in the price for danish customers, but it can mean some additional freight costs for customers from foreign countries!
-There is 2 years warrenty on the kits, but ofcourse not on you engine!
Read more about ESS supercharger systems at www.esstuning.com
ESS´s own description of the kit: (Please note that the installation time is when ESS is installing the kit, that means that the installation probaly will take som more time when others are installing it!)
ESS 330 TS2 8PSI Supercharger System (115-12)
The ESS 330 M54 TS2 series system is equipped with a Lysholm Twin Screw supercharger which has several advantages over the centrifugal compressors used in earlier ESS M52TU/M54 systems. It creates a higher boost-pressure at lower engine rpm, thus significantly increasing bottom and mid range torque. Lag time during shifts and on-off throttling are reduced to a minimum and the throttle response is incredible. The twin screw principle is also highly energy efficient, which contributes to the extreme power and torque output of the ESS TS Series systems. The patented liquid intercooling system consists of 3X500mm Laminova cores integrated into a high strength cast aluminium ESS intake manifold system covering all 6 cylinders resulting in flow-matched air distribution and optimal cylinder balance along with ultra-efficient cooling capacity for up to 550HP. The liquid intercooler coolant is pumped via a high capacity marine-grade circulation pump through a high capacity front mount heat exchanger. The system also utilizes a throttle body type butterfly air bypass valve to reduce SC parasitic drag and increase fuel economy during cruising conditions. The entire ESS TS system consumes less than 2hp during cruising and it is very energy efficient.
The overall system efficiency, torque delivery, power production, cooling capacity, and room for higher power stages is considerably higher than that of any competitor. The Twin Screw supercharger is the only product on the market today to combine both a positive displacement design for maximum low-end torque and highly efficient top-end horsepower output. Also emission levels at high speed and boost are lower than with other turbo and supercharging systems.
The redesigned ESS MS43/45 engine control software is perfectly calibrated for the TS supercharged engine providing optimum ignition timing under all conditions, recalibrated EGas for quicker throttle response, recalibrated VANOS control and perfectly optimized fuel delivery supplied by 6 larger Bosch fuel injectors also included with the kit. The software also features a 6800RPM rev limit and removed top speed governor.
Power development is 100% smooth and the car behaves just like stock until you demand raw power. Then, the car completely transforms, providing brutal acceleration normally reserved for big displacement performance cars.
The system maintains all OBD-II functions and it is backed by a comprehensive 2 year, unlimited mileage warranty program. The system installs in 8-10 hours using normal hand tools and no irreversible modifications to the car is necessary.
System components:
-Custom ESS Spec Lysholm 1.6L Twin Screw supercharger unit.
-High strength, dual-layer cast aluminum alloy ESS intake manifold with integrated high capacity Laminova based liquid intercooling system.
-Uni-belt SC drive system with additional OEM quality idler pulleys.
-6 larger Bosch fuel injectors.
-Throttle body style butterfly bypass system for superior fuel economy during cruising and optimal throttle response under all conditions.
-Perfectly optimized, dyno tweaked MS43/MS45 ECU software.
-CNC hard anodized brackets and hardware.
-Cast aluminium SC intake system with crankcase fume reduction system designed for boost.
-High temperature, custom made silicone hoses with clamps
-Detailed, step-by-step installation manual
-Heavy-Duty drive belt.
-All required installation hardware included
-2yr./unlimited mileage warranty.
ESS TS Series superchargers gives you the best of both worlds with instant boost, true industry-leading torque AND throttle response, while the ultra high efficiency of the twin-screw gives you maximum top end power. The TS2 is fully upgradeable to TS3.
ESS TS Series superchargers with it's Lysholm supercharger technology and CAD designed intake runners creates boost the instant the throttle is touched usually reaching full boost by ~2200 rpm - long before a centrifugal supercharger commonly even creates 1psi of boost, resulting in breathtaking low-mid range acceleration and it also removes the need to rev the engine high to get good acceleration.
On automatic cars the boost is reduced to 7PSI due to transmission restrictions.
Read more at www.esstuning.com
Let one of our BMW specialized workshops do the mounting, we got the know how and low prices!
Please note that the installation time is when ESS is installing the kit, that means that the installation probaly will take som more time when others are installing it!
Let one of our BMW specialized workshops do the mounting, we got the know how and low prices!