Tuning for BMW Z1 - New parts

• 1 2 3 4 5 6 7 8 9 10 11 (28)

  <<<

  >>>

  Display per page: 10 20 50 100

• Lowering-set Lowtec front/rear 30/30MM

  Product number: 06900
  

  (Direct link to 06900)
  To top

  Fits on models: Z1 All models (only models with 45MM spring holder on the rear axle)

  Out of stock. Expected in stock 10 working days after ordering. Price excl. VAT: EUR 130.30 VAT: (25%) EUR 32.58 Total incl. VAT: EUR 162.88 (Remember freight costs are calculated in the shopping basket) Weight: 6.00 KG Amount pr car: 1 set Add to basket set

  49658 49659 More pictures

  Stock agent Send to a friend Show details

  Guiding mount time: 1,5-2,5 hour(s).

  Without Tüv approval!
  Lowtech german quality!
  Please note: the mm. specification is measured from the standard hight of the BMW, if its equiped with for example a M-Tech. or BMW sport suspension which is about 15MM lower, you have to deduct the the mm in the specification we make for example = 40/40MM will then be 25/25MM! if you need help to find out whether your BMW is equiped with a BMW sport suspension or not, please don´t hesitate to contact your us, please have the last 7 figures of the chassinumber ready so we can check up on your BMW!
  
  Lowtec lowering springs is a german quality product. With a Lowtec set mounted on your BMW, you are guaranteed best handling under even extreme conditions! Lowtec also offers "Vorderakstieferlegung", which is a kit where you only lower the car at the front, because BMW´s often got a nice hight at the rear! you can also buy a "Keilform" set, which loweres more at the front than rear. All kits are german TÜV approved.
  
  Let one of our BMW specialized workshops do the mounting, we got the know how and low prices!
  

  Please note: the mm. specification is measured from the standard hight of the BMW, if its equiped with for example a M-Tech. or BMW sport suspension which is about 15MM lower, you have to deduct the the mm in the specification we make for example = 40/40MM will then be 25/25MM! if you need help to find out whether your BMW is equiped with a BMW sport suspension or not, please don´t hesitate to contact your us, please have the last 7 figures of the chassinumber ready so we can check up on your BMW!
  
  Let one of our BMW specialized workshops do the mounting, we got the know how and low prices!

  Get a message as soon as we get the product in stock.
  Subscribe by writing your email in the field below.
  Your e-mail: Subscribe
  You will be removed from the list once you have received an email.

  Type in email address of the person you would like to send an email to.
  Email: Send E-mail
  
  

• Lowtec protection-spray for coil-over system 400ML

  Product number: LOW87940
  

  (Direct link to LOW87940)
  To top

  Fits on models: Z1 All models

  The product is in stock. Amount: 6.00 pcs.. Price excl. VAT: EUR 9.47 VAT: (25%) EUR 2.37 Total incl. VAT: EUR 11.84 (Remember freight costs are calculated in the shopping basket) Weight: 0.40 KG Amount pr car: 1 pcs. Add to basket pcs.

  Stock agent Send to a friend Often sold together Show details

  Made in Germany!
  

  Get a message as soon as we get the product in stock.
  Subscribe by writing your email in the field below.
  Your e-mail: Subscribe
  You will be removed from the list once you have received an email.

  Type in email address of the person you would like to send an email to.
  Email: Send E-mail
  
  

• Lowering spring plates upper front 10MM

  Product number: 9208S
  

  (Direct link to 9208S)
  To top

  Fits on models: Z1 All models

  Out of stock. Expected in stock 1 working days after ordering. Price excl. VAT: EUR 68.52 VAT: (25%) EUR 17.13 Total incl. VAT: EUR 85.65 (Remember freight costs are calculated in the shopping basket) Weight: 2.00 KG Amount pr car: 1 set Add to basket set

  Stock agent Send to a friend Often sold together Show details

  Guiding mount time: 1,5-2 hour(s).

  Is your BMW not low enough at the front?, and can´t you get springs that lowers anymore? here´s the answar! theese german TÜV approved lowering spring plates loweres you car 10MM extra at front, and that is often what you need to get the perfect lowering! The spring plate puts the spring 10MM higher up arround the guide support, this means that the car won´t be "stiffer", it will be exactly the same as before, it will just be lower.
  

  Let one of our BMW specialized workshops do the mounting, we got the know how and low prices!

  Get a message as soon as we get the product in stock.
  Subscribe by writing your email in the field below.
  Your e-mail: Subscribe
  You will be removed from the list once you have received an email.

  Type in email address of the person you would like to send an email to.
  Email: Send E-mail
  
  

• Supension limiter rear hight 100MM

  Product number: 1300001
  

  (Direct link to 1300001)
  To top

  Fits on models: Z1 All models rear

  The product is in stock. Amount: 1.00 set. Price excl. VAT: EUR 20.46 VAT: (25%) EUR 5.12 Total incl. VAT: EUR 25.58 (Remember freight costs are calculated in the shopping basket) Weight: 0.25 KG Amount pr car: 1 set Add to basket set

  Stock agent Send to a friend Often sold together Show details

  Guiding mount time: 1-2 hour(s).

  Set 2 pieces!
  
  Do you have problems with your tyres bumping on the edge of the fenders? then this may solve it!
  
  Let one of our BMW specialized workshops do the mounting, we got the know how and low prices!
  

  Get a message as soon as we get the product in stock.
  Subscribe by writing your email in the field below.
  Your e-mail: Subscribe
  You will be removed from the list once you have received an email.

  Type in email address of the person you would like to send an email to.
  Email: Send E-mail
  
  

• Supension limiter rear hight 100MM

  Product number: 809943
  

  (Direct link to 809943)
  To top

  Fits on models: Z1 All models rear

  Out of stock. Expected in stock 10 working days after ordering. Price excl. VAT: EUR 27.19 VAT: (25%) EUR 6.80 Total incl. VAT: EUR 33.99 (Remember freight costs are calculated in the shopping basket) Weight: 0.25 KG Amount pr car: 1 set Add to basket set

  64861 64862 64863 More pictures

  Stock agent Send to a friend Often sold together Show details

  Guiding mount time: 1-2 hour(s).

  Set 2 pieces!
  
  Do you have problems with your tyres bumping on the edge of the fenders? then this may solve it!
  
  Let one of our BMW specialized workshops do the mounting, we got the know how and low prices!
  

  Get a message as soon as we get the product in stock.
  Subscribe by writing your email in the field below.
  Your e-mail: Subscribe
  You will be removed from the list once you have received an email.

  Type in email address of the person you would like to send an email to.
  Email: Send E-mail
  
  

• Supension limiter set with 10pcs open rings, hight 10MM, bore 16MM, outside diameter 40MM

  Product number: 811017
  

  (Direct link to 811017)
  To top

  Fits on models: Z1 All models where the bore fits, the damper piston can max. be 2mm larger than the bore! (Please, note the rings are open, so you can install the rings from outside without to disassemble the suspension).

  The product is in stock. Amount: 2.00 set. Price excl. VAT: EUR 9.47 VAT: (25%) EUR 2.37 Total incl. VAT: EUR 11.84 (Remember freight costs are calculated in the shopping basket) Weight: 0.25 KG Amount pr car: 1 set Add to basket set

  71857 More pictures

  Stock agent Send to a friend Often sold together Show details

  Guiding mount time: 1-2 hour(s).

  Set 10 pcs open rings! (Please note: check the diameter of the shockabsorber piston before ordering)!
  
  Do you have problems with your tyres bumping on the edge of the fenders? then this may solve it!
  
  Let one of our BMW specialized workshops do the mounting, we got the know how and low prices!
  

  Get a message as soon as we get the product in stock.
  Subscribe by writing your email in the field below.
  Your e-mail: Subscribe
  You will be removed from the list once you have received an email.

  Type in email address of the person you would like to send an email to.
  Email: Send E-mail
  
  

• Supension limiter set with 10pcs open rings, hight 10MM, bore 23MM, outside diameter 47MM

  Product number: 811025
  

  (Direct link to 811025)
  To top

  Fits on models: Z1 All models where the bore fits, the damper piston can max. be 2mm larger than the bore! (Please, note the rings are open, so you can install the rings from outside without to disassemble the suspension).

  The product is in stock. Amount: 2.00 set. Price excl. VAT: EUR 9.47 VAT: (25%) EUR 2.37 Total incl. VAT: EUR 11.84 (Remember freight costs are calculated in the shopping basket) Weight: 0.25 KG Amount pr car: 1 set Add to basket set

  71859 More pictures

  Stock agent Send to a friend Show details

  Guiding mount time: 1-2 hour(s).

  Set 10 pcs open rings! (Please note: check the diameter of the shockabsorber piston before ordering)!
  
  Do you have problems with your tyres bumping on the edge of the fenders? then this may solve it!
  
  Let one of our BMW specialized workshops do the mounting, we got the know how and low prices!
  

  Get a message as soon as we get the product in stock.
  Subscribe by writing your email in the field below.
  Your e-mail: Subscribe
  You will be removed from the list once you have received an email.

  Type in email address of the person you would like to send an email to.
  Email: Send E-mail
  
  

• Supension limiter set with 2pcs rings, hight 30MM, bore 23MM, outside diameter 47MM

  Product number: 803023
  

  (Direct link to 803023)
  To top

  Fits on models: Z1 All models rear where the bore fits

  The product is in stock. Amount: 2.00 set. Price excl. VAT: EUR 7.55 VAT: (25%) EUR 1.89 Total incl. VAT: EUR 9.44 (Remember freight costs are calculated in the shopping basket) Weight: 0.25 KG Amount pr car: 1 set Add to basket set

  64853 More pictures

  Stock agent Send to a friend Often sold together Show details

  Guiding mount time: 1-2 hour(s).

  Set 2 pcs open rings! (Please note: check the diameter of the shockabsorber piston before ordering)!
  
  Do you have problems with your tyres bumping on the edge of the fenders? then this may solve it!
  
  Let one of our BMW specialized workshops do the mounting, we got the know how and low prices!
  

  Get a message as soon as we get the product in stock.
  Subscribe by writing your email in the field below.
  Your e-mail: Subscribe
  You will be removed from the list once you have received an email.

  Type in email address of the person you would like to send an email to.
  Email: Send E-mail
  
  

• Supension limiter set with 2pcs rings, hight 50MM, bore 16MM, outside diameter 40MM

  Product number: 805016
  

  (Direct link to 805016)
  To top

  Fits on models: Z1 All models rear where the bore fits

  The product is in stock. Amount: 2.00 set. Price excl. VAT: EUR 7.37 VAT: (25%) EUR 1.84 Total incl. VAT: EUR 9.21 (Remember freight costs are calculated in the shopping basket) Weight: 0.25 KG Amount pr car: 1 set Add to basket set

  64855 64856 More pictures

  Stock agent Send to a friend Often sold together Show details

  Guiding mount time: 1-2 hour(s).

  Set 2 pcs open rings! (Please note: check the diameter of the shockabsorber piston before ordering)!
  
  Do you have problems with your tyres bumping on the edge of the fenders? then this may solve it!
  
  Let one of our BMW specialized workshops do the mounting, we got the know how and low prices!
  

  Get a message as soon as we get the product in stock.
  Subscribe by writing your email in the field below.
  Your e-mail: Subscribe
  You will be removed from the list once you have received an email.

  Type in email address of the person you would like to send an email to.
  Email: Send E-mail
  
  

• Supension limiter set with 2pcs rings, hight 65MM, bore 18MM, outside diameter 50MM

  Product number: 87616
  

  (Direct link to 87616)
  To top

  Fits on models: Z1 All models rear where the bore fits

  The product is in stock. Amount: 2.00 set. Price excl. VAT: EUR 10.85 VAT: (25%) EUR 2.71 Total incl. VAT: EUR 13.56 (Remember freight costs are calculated in the shopping basket) Weight: 0.25 KG Amount pr car: 1 set Add to basket set

  64841 64842 64843 More pictures

  Stock agent Send to a friend Show details

  Guiding mount time: 1-2 hour(s).

  Set 2 pcs open rings! (Please note: check the diameter of the shockabsorber piston before ordering)!
  
  Do you have problems with your tyres bumping on the edge of the fenders? then this may solve it!
  
  Let one of our BMW specialized workshops do the mounting, we got the know how and low prices!
  

  Get a message as soon as we get the product in stock.
  Subscribe by writing your email in the field below.
  Your e-mail: Subscribe
  You will be removed from the list once you have received an email.

  Type in email address of the person you would like to send an email to.
  Email: Send E-mail
  
  

• 1 2 3 4 5 6 7 8 9 10 11 (28)

  <<<

  >>>

  Display per page: 10 20 50 100

• Did you not find it

  Close X

• Name:
• Email:
• BMW model: (ex. E36)
• BMW size: (ex. 320I)
• BMW variant: (ex. Coupe)
• Year: (ex. 1991)
• Frame number:
• Additional info (Such as product number):
  
• Please contact me
   
• If you login, most of the fields will be filled out by the system.